RUN PUMP GAS OR RACE GAS New to this kit, one extra injector in 
the charge tube.
the charge tube. KIT INCLUDES:
G-28 V ban internal waste gate turbo, with 8 psi actuator. Run 8-15 psi.
2.5 in. polished stainless steel exhaust with quiet stainless muffler.
PUSH TURBO TUNED EFI controller.
BDX adjustable blow off valve.
Equal distribution and high flow air box.
BDX in tank 1-1 rising rate fuel pressure regulator with new spring rate.
New light weight oil system with the industries first liquid cooled oil tank.
| ||||||
New billet light weight air filter with Outerwears pre-filter. New billet gauge holder that mounts on bars includes: oil pressure gauge, fuel pressure gauge and boost pressure gauge. Plug and play electronics and components, no wire splicing or tapping. Kit comes 80% preassembled. 1 year warranty against manufacturer defects.
New to this kit, one extra injector in the charge tube. This helps control cooling much better than a intercoller stuffed under the hood, and to mention the ten or fifteen pounds of extra weight.
This kit rips! Don't let the price fool you. This kit utilizes all of the benefits of the HP kits, but with an internal waste gate turbo.
The turbo has an internal divider between the WG and the turbine with a 2.5 in. V-Band exhaust housing. The turbo is placed on top of the same platform as the more expensive HP kits, giving you great performance and value at an affordab SUGGESTED ITEMS
O2 GAUGE 225.00 Included in package
CLUTCH KIT 145.00 Included in package
DC Power kit 175.00
required on 2009
and up (cat part)
package
KIT
PACKAGE DEAL
| ||||||
| ||||||
Manufacturer of State of the Art, Light Weight, Turbo Kits.
PUSH TURBO
Arctic Cat M8 BIG BOR 900, HP RG Turbo Kit --5,695.
KIT INCLUDES: TiAL 30-71 with HTA billet compressor wheel, polish compressor housing, V band stainless exhaust housing with external waste gate.
TiAL light weight compact 38mm V band waste gate.
3 in. polished stainless steel exhaust with quiet stainless muffler.
PUSH TURBO TUNED EFI controller with 4 injector connectors.
BDX adjustable blow off valve.
Equal distribution and high flow air box.
High volume in tank fuel pump.
BDX in tank 1-1 rising rate fuel pressure regulator with new spring rate.
I C system (injection cooling) with 2 injectors in charge tube.
New light weight oil system with the industries first liquid cooled oil tank and turbo.
Boost controller. New billet light weight air filter with Outerwears pre-filter. New billet gauge holder that mounts on bars includes: oil pressure gauge, fuel pressure gauge and boost pressure gauge. Plug and play electronics and components, no wire splicing or tapping. Kit can run pump gas with 25% race gas at low boost. Kit comes 80% preassembled. 2 year warranty against manufacturer defects.
These kits are a true state of the art, high performance, turbo charging system. We use only the best components to create the most capable and forward thinking design available. Take a look at the fit and finish. All stock components such as the fuel regulator and pump, get replaced not relocated. The turbo and exhaust system mount and exit the same as stock exhaust. The design flows with the factory lay out giving it an OEM look. Polished stainless steel exhaust will last and look like new even after your last ride of the year. With a polished turbo housing and charge tube, a turbo of this caliber doesn't go out looking undone. We have used TiAL turbo housings and waste gates from the beginning. Last year we were able to retool and use the new compact V band 38mm waste gate. Using HTA compressor wheels and TiAL components we are able to make boost right after clutch engagement. We make the same HP at 12 psi that other turbo's make at 15-16 psi.
SUGGESTED ITEMS
BIG BORE KIT 1,995.00 Included in package
EGT GAUGE 350.00 Included in package
CLUTCH KIT 245.00 Included in package
INTERCOOLER 1,300.00 Included in package
( liquid to air )
DC Power kit 175.00
required on 2009
and up (cat part)
5,695.00
9,150.00
Arctic Cat M8 HP RG Turbo Kit --5,695.
KIT INCLUDES: TiAL 28-71 with HTA billet compressor wheel, polish compressor housing, V band stainless exhaust housing with external waste gate.
TiAL light weight compact 38mm V band waste gate.
3 in. polished stainless steel exhaust with quiet stainless muffler.
PUSH TURBO TUNED EFI controller with 4 injector connectors.
BDX adjustable blow off valve.
Equal distribution and high flow air box.
High volume in tank fuel pump.
BDX in tank 1-1 rising rate fuel pressure regulator with new spring rate.
I C system (injection cooling) with 2 injectors in charge tube.
New light weight oil system with the industries first liquid cooled oil tank and turbo.
Boost controller. New billet light weight air filter with Outerwears pre-filter. New billet gauge holder that mounts on bars includes: oil pressure gauge, fuel pressure gauge and boost pressure gauge. Plug and play electronics and components, no wire splicing or tapping. Kit can run pump gas with 25% race gas at low boost. Kit comes 80% preassembled. 2 year warranty against manufacturer defects.
These kits are a true state of the art, high performance, turbo charging system. We use only the best components to create the most capable and forward thinking design available. Take a look at the fit and finish. All stock components such as the fuel regulator and pump, get replaced not relocated. The turbo and exhaust system mount and exit the same as stock exhaust. The design flows with the factory lay out giving it an OEM look. Polished stainless steel exhaust will last and look like new even after your last ride of the year. With a polished turbo housing and charge tube, a turbo of this caliber doesn't go out looking undone. We have used TiAL turbo housings and waste gates from the beginning. Last year we were able to retool and use the new compact V band 38mm waste gate. Using HTA compressor wheels and TiAL components we are able to make boost right after clutch engagement. We make the same HP at 12 psi that other turbo's make at 15-16 psi.
SUGGESTED ITEMS
EGT GAUGE 350.00 Included in package
CLUTCH KIT 245.00 Included in package
INTERCOOLER 1,300.00 Included in package
( liquid to air )
DC Power kit 175.00
required on 2009
and up (cat part)
5,495.00
7,090.00
Arctic Cat M8 HP PG Turbo Kit --4,695.
KIT INCLUDES: TiAL 28-71 with HTA billet compressor wheel, polish compressor housing, V band stainless exhaust housing with external waste gate.
TiAL light weight compact 38mm V band waste gate.
3 in. polished stainless steel exhaust with quiet stainless muffler.
PUSH TURBO TUNED EFI controller.
BDX adjustable blow off valve.
Equal distribution and high flow air box.
BDX in tank 1-1 rising rate fuel pressure regulator with new spring rate.
New light weight oil system with the industries first liquid cooled oil tank and turbo.
New billet light weight air filter with Outerwears pre-filter. New billet gauge holder that mounts on bars includes: oil pressure gauge, fuel pressure gauge and boost pressure gauge. Plug and play electronics and components, no wire splicing or tapping. Kit comes 80% preassembled. 2 year warranty against manufacturer defects.
These kits are a true state of the art, high performance, turbo charging system. We use only the best components to create the most capable and forward thinking design available. Take a look at the fit and finish. All stock components such as the fuel regulator and pump, get replaced not relocated. The turbo and exhaust system mount and exit the same as stock exhaust. The design flows with the factory lay out giving it an OEM look. Polished stainless steel exhaust will last and look like new even after your last ride of the year. With a polished turbo housing and charge tube, a turbo of this caliber doesn't go out looking undone. We have used TiAL turbo housings and waste gates from the beginning. Last year we were able to retool and use the new compact V band 38mm waste gate. Using HTA compressor wheels and TiAL components we are able to make boost right after clutch engagement. We make the same HP at 8 psi that other turbo's make at 10-11 psi.
SUGGESTED ITEMS
O2 GAUGE 225.00 Included in package
CLUTCH KIT 245.00 Included in package
DC Power kit 175.00
required on 2009
and up (cat part)
4,695.00
4,915.00
Arctic Cat M8 G CROSSOVER Turbo Kit --3,595.
3,595.00
3,895.00
